CoFe2O4/CuO活化过氧乙酸高效降解磺胺甲恶唑(英文)

利用化学沉淀法和溶胶凝胶法,通过两步法成功制备出含有尖晶石钴铁氧体和氧化铜的复合催化剂CoFe₂O₄/CuO,通过扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和X射线衍射(XRD)对制备出的CoFe₂O₄/CuO进行表征,探究不同高级氧化体系对磺胺甲恶唑(SMX)去除能力,考察过氧乙酸(PAA)浓度、催化剂投加量、水体中常见干扰物质(Cl^-,HCO-3,SO₄^2-,HA)和不同自由基捕获剂对SMX去除的影响。分析结果表明CoFe₂O₄/CuO同时具有CoFe₂O₄与CuO的特征,对比单独CoFe₂O₄与CuO,CoFe₂O₄/CuO对PAA展现出极高的活化性能,在最佳反应条件下(催化剂投加量=20mg·L^-1,c(PAA)=200μ...     

乙烯在钯圆盘电极的电化学氧化研究（英文）

由于巨大的潜在市场,乙烯的电化学氧化受到愈来愈多的关注。目前,主流的电化学氧化法仍以依赖于氧化还原媒介的介导氧化法为主,而这些媒介的使用在电解过程中产生大量的腐蚀性中间体,使其实际应用受到阻碍。直接电氧化法可有效规避此问题,但又受到低活性和低选择性的限制。在本工作中,我们针对目前最先进的钯催化直接氧化体系,在中性条件下开展了一系列电化学研究,以对该过程的机理获取更深入的认识。在氮气和乙烯氛围下,钯电极的循环伏安谱图有显著区别。我们发现电解过程中生成的Pd(Ⅱ)物种在乙烯氛围下可绕过原本的电化学还原路径,通过一个化学步还原为Pd(0),因此可能是乙烯氧化的活性位点。Pd(Ⅱ)物种所对应的还原峰也因此可作为乙烯吸附的数量的指标。通过电化学脉冲序列的设计,我们在钯催化剂上识别了两种具有不同吸附强度的乙烯,其强、弱吸附模式所对应的电荷转移比例约为0.3:1。弱吸附的乙烯在钯电极表面表现出可逆的吸脱附行为,而具有强吸附模式的乙烯无法通过物理过程脱附,可能指向到乙烯深度氧化过程。这项工作为进一步设计高性能乙烯直接电氧化催化剂提供了设计思路和方向。     

Polyvinyl alcohol-modified graphene oxide as a support for bimetallic Pt–Pd electrocatalysts to enhance the efficiency of formic acid oxidation

The aim of this research was to study the efficiency of polyvinyl alcohol (PVA)-modified graphene oxide (GO) as a supporting material for catalysts that oxidize formic acid. The active metal catalysts (e.g., Pt and Pd) were electrodeposited on PVA/GO surfaces. The morphologies of the prepared catalysts were characterized by scanning electron microscopy and transmission electron microscopy, while their chemical compositions were identified by X-ray diffraction and X-ray photoelectron spectroscopy. The results show that compared with the other catalysts on GO, the prepared active PtPd alloy catalyst nanoparticles with 11.49–20.73 nm sizes were well dispersed on the PVA/GO surfaces. Electrochemical results indicate that the activities of the catalysts with PVA provided a higher current density than that of the catalysts without PVA. The bimetallic 3Pt3Pd/PVA/GO catalyst showed the greatest catalytic activity, stability, and CO oxidation when compared to those of other catalysts. The electronic, morphological, and structural properties promote the mass-charge transfer through the interaction. These results indicate that the PVA-modified GO provides a suitable site for active bimetallic catalyst surfaces, resulting in excellent formic acid oxidation and high CO elimination. The 3Pt3Pd/PVA/GO electrocatalyst is promising for enhancing formic acid oxidation.     

Synthesis of 1,3-Dioxan-2-ones by Photo-Aerobic Selenium-π-Acid Multicatalysis

An expedient method for the synthesis of cyclic carbonates from homoallylic carbonic acid esters by means of photo-aerobic selenium-π-acid multicatalysis is reported. Until now, conceptually related methods commonly relied either on the stoichiometric addition of electrophiles onto the substrate's alkene moiety or the presence of pre-installed leaving groups in allylic position of said alkene to – in part, catalytically – initiate an intramolecular attack by an adjacent carbonic acid ester group. In sharp contrast, the current study shows that the C−C double bond of homoallylic carbonic acid esters can be directly activated by the catalytic interplay of a pyrylium dye and a diselane using ambient air as the sole oxidant and visible light as an energy source.     

Azodicarboxylate-Mediated Peptide Cyclisation: Application to Disulfide Bond Formation in Solution and Solid Phase

Cyclic peptides are important molecules, playing key roles in protein architecture, as chemical probes, and increasingly as crucial structural elements of clinically-useful therapeutics. Herein we report methodology using azodicarboxylates as efficient reagents for the facile synthesis of cyclic peptides through a disulfide bridge. The utility of this approach in both solution and solid-phase, and compatibility with common amino acid side chain functionalities is demonstrated, resulting in cyclic peptides in good yield and purity. This approach has significant potential application for synthesis of molecules of biological or therapeutic significance.     

Hydrogen Peroxide Production of Individual Nanosecond Pulsed Discharges Submerged in Water of Elevated Conductivity

The production of hydrogen peroxide (H₂O₂) is a key parameter for the performance of pulsed discharges submerged in water utilized as advanced oxidation process. So far, any related assessment of the underlying mechanism was conducted for the application of several hundred discharges, which did not allow for a correlation with physical processes. Moreover, the production was rarely investigated depending on water conductivity as one of the most important parameters for the development of submerged discharges. Accordingly, hydrogen peroxide generation was investigated here for individual single discharge events instigated with 100 ns high-voltage pulses in water with three different conductivities and was associated with the discharge development, i. e. spatial expansion and dissipated electrical energy. The approach necessitated the improvement of an electrochemical flow injection analysis based on the reaction of Prussian blue with H₂O₂. Hydrogen peroxide concentrations were quadratically increasing with propagation time and stable for different water conductivities. H₂O₂ production per unit volume of a discharge was constant over time with an estimated rate constant of 3.2 mol ⋅ m⁻¹ s⁻¹, averaged over the crosssectional area of all discharge filaments. However, the individually dissipated energy increased with conductivity, hence, the production efficiency decreased from 6.1 g ⋅ kWh⁻¹ to 1.4 g ⋅ kWh⁻¹, which was explained by increased resistive losses within the bulk liquid.     

Heteroleptic and Homoleptic Iron(III) Complexes with a Tris(N-Heterocyclic Carbene) Borate Ligand: Synthesis,Characterization, and Catalytic Application

Heteroleptic and homoleptic iron(III) complexes supported by a tris(N-heterocyclic carbene) borate ligand have been prepared and crystallographically characterized. The strong electron-donating character of the tris(carbene) donor was revealed by UV-vis absorption spectroscopy and electrochemical measurements combined with quantum chemical calculations. The catalytic activity of each complex was evaluated in cyclohexane oxidation reaction using meta-chloroperoxybenzoic acid (=mCPBA) as an oxidant, and both complexes show high catalytic activity and selectivity with TON=∼350 and A/(K+L)=8–10. Mechanistic studies suggested that radical-chain processes are involved in the reaction due to mCPBA acting as a one-electron oxidant, concomitant with the pathway of metal-based reactive species. Moreover, it was found that the homoleptic and heteroleptic complexes differed significantly in the involvement of metal-based active species, with the homoleptic complex exhibiting more metal-based reactions.     

High Valent Mercury Fluoride Ions

Mercury fluoride ions formed during the laser ablation of HgF_{2( s )} show the formation of six different cluster ion series viz., HgF_n^±, Hg_nF_n–2^±, Hg_nF_n–1^±, (HgF)_n^±, Hg_nF_n+1^±, and Hg_nF_n+2^±. Among the different ion series, the observation of high valent HgF_n^±_(n^±_{=3,4; n}⁻_=6–8) indicates the existence of corresponding molecules which signify the remarkable participation of 5d Hg electrons in the chemical bonding with F atoms and thus make Hg a truly transition metal. Further, molecular orbital calculations show a large HOMO-LUMO energy gap (≥3 eV) and high electron affinity (≥5 eV) that indicates highly stable HgF_n=3,4,6,8 with super halogen properties.     

Base-Promoted Difunctionalization of Alkynes: One-Pot Synthesis of Polysubstituted Chromones

A transition-metal-free one-pot procedure for the difunctionalization of alkynes by C−C triple bond oxidation and transformation towards chromone derivatives has been developed. It involves cascade reactions for carbonylation of alkynes, base-promoted C−C σ-bond cleavage, and intramolecular cyclization. This procedure provides an efficient protocol for the synthesis of polysubstituted chromones from readily available starting materials.     

Experimental and theoretical studies of carbon monoxide oxidation over W/Cu/Ce trimetallic oxides: the effect of W addition

It is a significant method to prepare highly dispersed polymetallic oxides using in-situ doping metal organic frameworks as precursors. Herein, a series of straw-like W/Cu/Ce trimetallic oxides were prepared by using phosphotungstic ionic liquid@Ce-based metal organic framework adsorbing with copper acetylacetonate as precursors. The effect of W content on catalytic activity of W/Cu/Ce trimetallic oxides for carbon monoxide (CO) oxidation was well-investigated. Comprehensive characterization methods and density functional theory calculations were adopted to reveal the property changes of Cu/CeO₂ catalyst by the addition of W. The results demonstrated that W, Cu, and Ce are highly dispersed in the prepared W/Cu/Ce trimetallic oxides, and adding proper amount of W can improve the activity of the catalyst. H₂ temperature-program reduction profiles, X-ray photoelectron spectroscopy, in-situ diffuse reflectance infrared Fourier transform spectroscopy, and density functional theory calculations clearly revealed that after the addition of W, the strength of Ce-O bond is weakened, the oxygen vacancy is increased, and the adsorption of CO is enhanced, respectively, which are vital reasons for its high catalytic activity. In addition, the CO oxidation reaction pathway over prepared W/Cu/Ce trimetallic oxides based on the Mars-van Krevelen mechanism was studied, and the results exhibited that CO can wrest the lattice oxygen of W/Cu/Ce trimetallic oxides to form CO₂, which is also proved to be the rate-determining step in reaction process.